Extra-large spindle bearings 6 PLUS 6 and VS6 spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings.
Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450-4,700 rpm with a 1,725 rpm motor.
Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring-loaded, rubber-tipped plunger that quickly restores correct belt tension
Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling.
Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 425; 600; 1,100; 2,050; 3,900 and 5,500 rpm- 11.8 to 1 speed ratio.
Amazon.com Product Description The DELTA 15-334 Variable Speed Drill Press features a 3/4 HP three-phase 200-volt motor that has a 24-volt push-button, magnetic starter. It has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The table tilts 90 degrees in both directions and measures 11 x 14 inches. Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key.
Product Description The Delta 15-343 15-inch Variable Speed Production Floor Drill Press features a 3/4 HP single-phase motor with a 24-volt push-button magnetic starter. It has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you’ll always have full power transmission. Features: Extra-large spindle bearings and spindle pulleys that are supported by lubricated-for-life ball bearings Quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs Snubber feature holds speed settings constant no matter the load conditions. Table tilts 90 degrees in both directions What’s in The Box: Delta 15-343 15-inch Variable Speed Production Floor Drill Press Self-Ejecting Chuck Key Self-Locking Depth Stop Depth Gauge
Product Description The JET J-2223vs Drill Press features spindle speeds from 300 to 2000 RPM, a heavy-duty cast iron design and large precision-ground T-slot production table for easy set ups. HP: 2, Volts: 220/440V, pre-wired 440V, Speed (RPM): 300 – 2,000, Speeds (qty.): Variable, Vertical Stroke: 6, 360deg Head Swivel: Yes, Draw Bar: No, Swing: 20in., Drilling Capacity (in.): 1 1/4, Worktable L x W (in.): 18 x 15, Stand Included: No, Dimensions L x W x H (in.): 34 x 27 x 78
Extra-large spindle bearings 6 PLUS 6 and VS6- spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings. Massive quill is a full 2-inch diameter.
Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450-4,700 rpm with a 1,725 rpm motor.
Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring-loaded, rubber-tipped plunger that quickly restores correct belt tension
Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling.
Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 425; 600; 1,100; 2,050; 3,900 and 5,500 rpm- 11.8 to 1 speed ratio.
Amazon.com Product Description The DELTA 15-331 Variable Speed Drill Press features a 3/4 HP single-phase motor that has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The table tilts 90 degrees in both directions and measures 11 x 14 inches. Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key.
Product Description J-A5818 15″ Vs Floor Drill Press, 230/460V, 3Ph, 3Hp Speeds from 400 to 5000 RPMHandwheel adjustment sets the speedsLarge 2-1/4″ quill allows greater accuracy3″ column diameter for maximum spindle stiffness6″ stroke for deep hole applicationsAccurate depth stop for precise hole depths1/2″ drill chuck and arborSafety collar FREE SHIPPING ON THIS ITEM WITHIN CONTINENTAL US 70.00 L. 31.00 W. 31.00 H.
Product Description Heavy-duty drill press designed for small precision work. Changeable speeds accommodate various materials. Rugged cast metal housing and base with machined surface to keep your work square. No-flex, solid-steel column. Precision 3-jaw chuck and key. Ball bearing spindle assures low vibration, high accuracy and long life. Calibrated depth control with positive stop. High-torque motor plugs into standard 110V current. Quick release handle lets you adjust chuck-to-base distance instantly. Sliding gauge for drilling in-line holes. Specifications: Spindle travel: 1-9/16″ Chuck-to-base distance: 8″ Center of chuck to front of column: 1.181″ Chuck capacity: 1/4″ Drive system: 2-step pulley with 150 watt variable speed motor Base size: 6-1/2″ x 10-13/16″ Spindle: 0- 3600 rpm; 0-5000 rpm JT1 taper (male) Weight: 27 lbs. Height: 16″
Extra-large spindle bearings 6 PLUS 6 and -inchVS6-inch spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings.
Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450-4,700 rpm with a 1,725 rpm motor.
Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring-loaded, rubber-tipped plunger that quickly restores correct belt tension
Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling…PLUS, the extra stroke required for clearing jigs and fixtures
Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 425; 600; 1,100; 2,050; 3,900 and 5,500 rpm- 11.8 to 1 speed ratio.
Amazon.com Product Description The DELTA 15-344 Variable Speed Drill Press features a 3/4 HP three-phase 200-volt motor with a 24-volt push-button magnetic starter. It has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The production table tilts 90 degrees in both directions and measures 15.5 x 21.5 inches (12 x 18 inches inside of coolant trough). Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key.
Alternator test setup for generating hydroxy gas. Using a standard drill press, a 5/16″ allen key and a GM alternator. I found a pickup from a cruise control kit, and used that to measure the speed that the alternator is turning.
