Product Description The Delta 15-231 15-inch 6 Speed Drill Press with Tilting Table has a 3/4 HP single-phase motor that provides six speeds varying from 425 to 5500 RPM and is capable of all drill jobs on different materials. The Delta 15-231 maintains proper belt tension automatically so you’ll always have full power transmission. Features: Extra-large spindle bearings and spindle pulleys that are supported by lubricated-for-life ball bearings Quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs Snubber feature holds speed settings constant no matter the load conditions. Table tilts 90 degrees in both directions and measures 11 x 14 inches What’s In The Box: Delta 15-231 15-inch 6 Speed Drill Press with Tilting Table Self-Ejecting Chuck Key Self-Locking Depth Stop Depth Gauge
Extra-large spindle bearings 6 PLUS 6 and VS6- spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings. Massive quill is a full 2-inch diameter.
Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450-4,700 rpm with a 1,725 rpm motor.
Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring-loaded, rubber-tipped plunger that quickly restores correct belt tension
Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling.
Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 425; 600; 1,100; 2,050; 3,900 and 5,500 rpm- 11.8 to 1 speed ratio.
Amazon.com Product Description The DELTA 15-331 Variable Speed Drill Press features a 3/4 HP single-phase motor that has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The table tilts 90 degrees in both directions and measures 11 x 14 inches. Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key.
Product Description J-A5818 15″ Vs Floor Drill Press, 230/460V, 3Ph, 3Hp Speeds from 400 to 5000 RPMHandwheel adjustment sets the speedsLarge 2-1/4″ quill allows greater accuracy3″ column diameter for maximum spindle stiffness6″ stroke for deep hole applicationsAccurate depth stop for precise hole depths1/2″ drill chuck and arborSafety collar FREE SHIPPING ON THIS ITEM WITHIN CONTINENTAL US 70.00 L. 31.00 W. 31.00 H.
Product Description Heavy-duty drill press designed for small precision work. Changeable speeds accommodate various materials. Rugged cast metal housing and base with machined surface to keep your work square. No-flex, solid-steel column. Precision 3-jaw chuck and key. Ball bearing spindle assures low vibration, high accuracy and long life. Calibrated depth control with positive stop. High-torque motor plugs into standard 110V current. Quick release handle lets you adjust chuck-to-base distance instantly. Sliding gauge for drilling in-line holes. Specifications: Spindle travel: 1-9/16″ Chuck-to-base distance: 8″ Center of chuck to front of column: 1.181″ Chuck capacity: 1/4″ Drive system: 2-step pulley with 150 watt variable speed motor Base size: 6-1/2″ x 10-13/16″ Spindle: 0- 3600 rpm; 0-5000 rpm JT1 taper (male) Weight: 27 lbs. Height: 16″
ProLine Mini Drill Press. Benchtop model featres five speeds from 760 to 3070 RPM. Adjustable work table tilts, turns, and swings. Full size 1/2″ chuck. Features a heavy duty 1/2 HP all ball bearing motor.
li5 Speed Drill Press by ProLine li1/2 HP Ball Bearing Motor li120 Volts, 60Hz li5 Speeds 760 to 3070 RPM liIncludes Adjustable Work Table liChuck Size: 1/2″ liUL Listed and Approved liOperators Manual liMSRP $179.95
Extra-large spindle bearings 6 PLUS 6 and -inchVS6-inch spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings.
Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450-4,700 rpm with a 1,725 rpm motor.
Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring-loaded, rubber-tipped plunger that quickly restores correct belt tension
Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling…PLUS, the extra stroke required for clearing jigs and fixtures
Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 425; 600; 1,100; 2,050; 3,900 and 5,500 rpm- 11.8 to 1 speed ratio.
Amazon.com Product Description The DELTA 15-344 Variable Speed Drill Press features a 3/4 HP three-phase 200-volt motor with a 24-volt push-button magnetic starter. It has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The production table tilts 90 degrees in both directions and measures 15.5 x 21.5 inches (12 x 18 inches inside of coolant trough). Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key.
Using a homebuilt X/Y table acting under computer control (made out of IKEA AS-IS room parts) and a human operated Z axis (dremel drill press) to cut out a bracket. This video is running at 4X actual speed (and really, routing things out gets boring after a while…) and shows one pass through the wood. The full bracket took around 2 hours to cut out.
