Posted by
Thomas – February 3, 2010
- 1-1/4 hp motor floor-standing electric, fully-automatic pocket hole boring machine
- Flat step of drill bit ensures that bottom of pocket hole is perfectly flat so the screw head will seat flush
- Hardened steel drill guide ensures consistent hole placement whether the material is oak, maple, hickory, MDF, melamine or veneered plywood
- Simple design results in very fast drill bit changes
- Extremely quiet for operator comfort
Product Description
The DK1100 FP is a floor-standing, entirely pneumatic powered, fully-automatic pocket hole boring machine. 110-120 psi is recommended to power the direct drive air motor, hold-down clamp and forward motion cylinder. The DK1100 series features a reliable, one-step drilling operation through a hardened steel drill guide to produce the pocket hole. The hole is round sided with a flat bottom that allows a screw head to seat flushly in the bottom of the pocket and the hole to be plugged with wooden dowel. The DK1100 series are built to be extremely quiet for operator comfort and their simple design results in very fast drill bit changes. A FREE demonstration video is available.
Kreg DK1100 FP 1-1/4 Horsepower Floor Pnuematic Fully-Automatic Single Spindle Pocket Machine
Posted by
Thomas – January 2, 2010
- 3/4 HP single-phase motor with a push-button, magnetic starter
- Six speeds varying from 425 to 5500 RPM
- Extra-long quill travel for gang drilling
- Large tilting production table measures 15.5 x 21.5 inches
- Backed by a 2-year warranty
Amazon.com Product Description
The DELTA 15-262 6 Speed Drill Press features a 3/4 HP single-phase motor that has a 24-volt push-button, magnetic starter. It provides six speeds varying from 425 to 5500 RPM, and is capable of all drill jobs on different materials. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The production table tilts 90 degrees in both directions and measures 15.5 x 21.5 inches (12 x 18 inches inside of coolant trough). Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key. The DELTA 15-262 is backed by a two-year warranty.
DELTA 15-262 15 inch 6 Speed Drill Press w/Production Table Single Phase w/Magnetic Starter
Posted by
Thomas – January 2, 2010
- 3/4 HP single-phase motor with a push-button magnetic starter
- Variable-speed drive lets you instantly select a spindle speed while running
- Extra-long quill travel for gang drilling
- Large, production table tilts in both directions and measures 15.5 x 21.5 inches
- Backed by a 2-year warranty
Amazon.com Product Description
The DELTA 15-342 Variable Speed Drill Press features a 3/4 HP single-phase motor with a 24-volt push-button magnetic starter. It has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The production table tilts 90 degrees in both directions and measures 15.5 x 21.5 inches (12 x 18 inches inside of coolant trough). Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key. The DELTA 15-342 is backed by a two-year warranty.
DELTA 15-342 15 inch Variable Speed Drill Press w/Production Table Single Phase w/Magnetic Starter
Posted by
Thomas – January 1, 2010
- 1/2 HP single-phase motor
- 16 speeds from 175 RPM to 8200 RPM
- Head tilts 45 degrees left or right
- Large cast iron table measures 26 x 18 inches
- Backed by a 2-year warranty
Amazon.com Product Description
The DELTA 15-126 15-inch RAM Radial Drill Press Single Phase provides the versatility of a power tool with the capacity and performance of a machine tool. The drill features a 1/2 HP single-phase motor and provides a range of 16 different speeds that vary from as low as 175 RPM up to 8200 RPM. The large 26 x 18-inch table is made of cast iron and provides four T-Slots and an oil trough that can handle a half-inch pipe. The head tilts 45-degrees in either direction, and has an easy-to-read scale. With a 42-inch column, the press has extra spindle nose to table capacity, and has a six-inch quill stroke with a ram travel of 17 inches. The press is smartly designed with convenient controls such as an adjustable quill return spring, quill lock knob, and more. The 15-126 includes six-inch spindle travel, No. 2 MT spindle, 42-inch column, 65-863 floor stand, head, jackshaft assembly, ram, cradle, column, table, raising mechanism, belt guards, motor pulley, 49-287 V-belt, 49-105 V-belt, motor and controls. It is backed by a two-year warranty.
DELTA 15-126 15 inch RAM Radial Drill Press Single Phase
Posted by
Thomas – January 1, 2010
- 3/4 HP single-phase motor
- Variable-speed drive lets you instantly select a spindle speed while running
- Extra-long quill travel for gang drilling
- Large, production table tilts in both directions and measures 15.5 x 21.5 inches
- Backed by a 2-year warranty
Amazon.com Product Description
The DELTA 15-341 Variable Speed Drill Press features a 3/4 HP single-phase motor that has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The production table tilts 90 degrees in both directions and measures 15.5 x 21.5 inches (12 x 18 inches inside of coolant trough). Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key. The DELTA 15-341 is backed by a two-year warranty.
DELTA 15-341 15 inch Variable Speed Drill Press w/Production Table Single Phase
Posted by
Thomas – January 1, 2010
- 3/4 HP single-phase motor with a push-button, magnetic starter
- Variable-speed drive lets you instantly select a spindle speed while running
- Extra-long quill travel for gang drilling
- Tilting table measures 11 x 14 inches
- Backed by a 2-year warranty
Amazon.com Product Description
The DELTA 15-332 Variable Speed Drill Press features a 3/4 HP single-phase motor that has a 24-volt push-button, magnetic starter. It has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The table tilts 90 degrees in both directions and measures 11 x 14 inches. Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key. The DELTA 15-332 15-inch Variable Speed Drill Press w/Tilting Table Single Phase w/Magnetic Starter is backed by a two-year warranty.
DELTA 15-332 15 inch Variable Speed Drill Press w/Tilting Table Single Phase w/Magnetic Starter
Posted by
Thomas – January 1, 2010
- 3/4 HP single-phase motor with a push-button, magnetic starter
- Six speeds varying from 425 to 5500 RPM
- Extra-long quill travel for gang drilling
- Tilting table measures 11 x 14 inches
- Backed by a 2-year warranty
Amazon.com Product Description
The DELTA 15-232 6 Speed Drill Press features a 3/4 HP single-phase motor that has a 24-volt push-button, magnetic starter. It provides six speeds varying from 425 to 5500 RPM, and is capable of all drill jobs on different materials. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The table tilts 90 degrees in both directions and measures 11 x 14 inches. Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key. The DELTA 15-232 is backed by a two-year warranty.
DELTA 15-232 15 inch 6 Speed Drill Press w/Tilting Table Single Phase w/Magnetic Starter
