The powertrain gears and spline shafts are made of the finest quality, heat treated and ground nickel-chrome steel, giving extra strength and smoothness to high torque loads
The spindle is made of finest case hardened steel, for extra strength and wear
The spindle is supported by double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the top
Build to withstand exceptionally heavy drilling and boring loads to insure maximum accuracy
Arm raising safety device prevents arm from dropping
Product Description J-1100R 4′ Arm Radial Drill Press 3Hp, 230V The power train gears and spline shaft are made of the finest quality, heat treated and ground nickel-chrome steel, giving extra strength and smoothness to high torque loadsThe spindle is made of the finest case hardened steel for extra strength and wearThe spindle is supported by double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the topThe spindle is built to withstand exceptionally heavy drilling and boring loads and to insure maximum accuracyPush button controls are all reduced to 110VElectrical circuits are located in the built-in control box at the rear of the arm- this keeps the controls dust and humidity free while making them easily accessible for maintenance.Entire frame is made of Meehanite and high tensile strength cast iron to handle the heaviest of jobsArm raising safety device prevents arm from droppingCounter balanced mechanism for spindle return12 speeds/3 feed rates make exotic materials easier to drill, bore and tapCentralized control centerAutomatic tool ejectorIndependent arm manual clamping system, which locks and unlocks head and columnBuilt in work lightCoolant pumpTool kitBox table FREE GROUND SHIPPING 89.00 L. 74.00 W. 34.00 H.
Product Description J-1600R-4 Radial Drill Press 75Hp, 460 The power train gears and spline shaft are made of the finest quality, heat treated and ground nickel-chrome steel, giving extra strength and smoothness to high torque loadsThe spindle is made of the finest case hardened steel for extra strength and wearThe spindle is supported by double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the topThe spindle is built to withstand exceptionally heavy drilling and boring loads and to insure maximum accuracyPush button controls are all reduced to 110VElectrical circuits are located in the built-in control box at the rear of the arm- this keeps the controls dust and humidity free while making them easily accessible for maintenanceEntire frame is made of Meehanite and high tensile strength cast iron to handle the heaviest of jobsArm raising safety device prevents arm from droppingCounter balanced mechanism for spindle return12 speeds/3 feed rates make exotic materials easier to drill, bore and tapCentralized control centerAutomatic tool ejectorHydraulic head and column clampingBuilt in work lightCoolant pumpTool kitBox table 116.00 L. 112.00 W. 55.00 H.
Increased drilling versatility with variable spindle-to-column swing
Swing easily adjusts from 4″ to 13″ allowing center-drilling on 26″-diameter object
Spindle tilts to 90-degrees L/R, table tilts 45-degrees L/R, 4″ spindle travel
Heavy-duty 1/2 HP commercial-grade motor, 5 speeds from 480 – 3550 RPM
1/2″ chuck with MT2 taper spindle
Product Description An outstanding value in a well-built radial drill press. Overall dimensions: height 28-1/2″, top width 6-1/2, base 13″L x 5″W, 5″ support fence for stability. Table size 9″W x 8″L, base size 13″L x 8-3/4″W. Maximum distance to table 9″ (spindle), 7″ (chuck); maximum distance from spindle end to table surface 10-1/2″. 64 lbs.
