Posted by
Thomas – January 18, 2011
- Jaw width & opening 8 inch
- Overall height 3-1/2 inch
- Overall length of vise 15-7/16 inch
- Less than 0.002 inch jaw deflection at 2,000 pounds clamping pressure
- Vise, manual
Product Description
Drill Press Vises Type: Drill Press Jaw Width: 8 Jaw Opening: 8
Palmgren 12801 DPL80 Low Profile Drill Press Vise 8.0 Inch
Posted by
Thomas – May 25, 2010
- Study cast iron construction
- Removable machined steel anvil provides accurate work support in four slot positions
- Rugged steel ram is driven by machined pinion.
- Punches or tools may be added to the end of the ram with the aid of a magnetic insert
- Base drilled for mounting on bench or pedestal.
Palmgren 61301 AP30 3-Ton Manual Arbor Press
Related Blogs
Posted by
Thomas – May 10, 2010
- Study cast iron construction
- Removable machined steel anvil provides accurate work support in four slot positions
- Rugged steel ram is driven by machined pinion.
- Punches or tools may be added to the end of the ram with the aid of a magnetic insert
- Base drilled for mounting on bench or pedestal.
Product Description
Arbor Presses Machine Type: Mechanical Pressure: 4
Palmgren 61401 AP40 4-Ton Manual Arbor Press
Related Blogs
Posted by
Thomas – April 27, 2010
- The stand has a slot on the top for pieces which need to extend below the base of the press table
- Stand comes with built-in cup for catching expressed pieces
- Base and top are case iron with a body of welded steel
- Fits all Palmgren 2-4 ton arbor presses
Palmgren 70103 Arbor Press Stand for all Palmgren 2 to 4 Ton Arbor Presses
Related Blogs
Posted by
Thomas – April 17, 2010
- Study cast iron construction
- Removable machined steel anvil provides accurate work support in four slot positions
- Rugged steel ram is driven by machined pinion.
- Punches or tools may be added to the end of the ram with the aid of a magnetic insert
- Base drilled for mounting on bench or pedestal.
Product Description
Arbor Presses Machine Type: Mechanical Pressure: 1/2
Palmgren 61051 AP05 1/2-Ton Manual Arbor Press
Posted by
Thomas – April 13, 2010
- Cast-iron head, base, table and column
- Precision ground work table can be tilted 45 degrees both right and left, and rotates 360? on a vertical axis. Steel rack and pinion with locking mechanism for easy table height adjustment.
- Enclosed ball bearing quill assembly with long spindle travel. Maximum spindle run-out of 0.0005″.
- Locking power switch prevents unauthorized use.
Palmgren 80171 3/4 Horsepower 17-Inch Bench Drill Press
Posted by
Thomas – February 5, 2010
- Study cast iron construction
- Removable machined steel anvil provides accurate work support in four slot positions
- Rugged steel ram is driven by machined pinion.
- Punches or tools may be added to the end of the ram with the aid of a magnetic insert
- Base drilled for mounting on bench or pedestal.
Palmgren 61302 RS30 3-Ton Manual Ratcheting Arbor Press
Posted by
Thomas – January 22, 2010
- Rugged, heavy duty cast iron for smooth operation
- 1 HP motor is actual working HP
- Variable speed drive with digital readout for accurate RPM adjustment
- Infinitely variable speed from 300 to 3000 RPM
- Steel gears in rack and pinion to accurately raise and lower table
Palmgren 80152 15 Inch Heavy Duty Variable Speed Floor Model Drill Press
Posted by
Thomas – January 7, 2010
Product Description
Base, motor housing and end-shields made from cast iron, cast aluminum and steel (depending on the model) CSA NRTL/C certified (except 3-phase units), OSHA compliant. When accurate drilling is required, these Palmgren Drill Presses are neccesity, They are designed with a rigid stable construction along with precision machining for accurate performance. Large motor enables drilling in tough materials like cast iron and steel. Greater low-end speed range for larger drilling capacity. Long quill travel for deep operations. Heavy cast metal quill handle with rubber handles for comfortable use. Rapid and easy speed changes with swing-mount motor and pulley system. Cast iron head, table and column. Precision ground work table can be tilted 45 degrees both right and left, and rotates 360 degrees on a vertical axis. Includes coolant trough. Enclosed ball bearing quill assembly with long spindle travel. Maximum spindle run-out of 0.0005 inches (.0127mm) Hardened steel rack and pinion with locking mechanism for easy table height adjustment. Precision-ground worktable with 5/8 inches (16mm) T-slots for secure mounting of vise or other workholding stool. Locking power switch prevents unauthorized use. Quick-change vertical depth-stop for accurate and repeatable feed lenght. Includes chuck with safety-eject key, chuck, arbor and power cord.
Palmgren 20″ Floor 12 Speed Drill Press – 80206
